Making install in tools make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/tools' Making install in lemon make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/tools/lemon' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/tools/lemon' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/tools/lemon' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/tools/lemon' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/tools' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/tools' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/tools' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/tools' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/tools' Making install in wiretap make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/wiretap' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/wiretap' /bin/sh ./../mkinstalldirs /usr/new/lib /bin/sh ./libtool --mode=install /usr/bin/install -c libwiretap.la /usr/new/lib/libwiretap.la /usr/bin/install -c .libs/libwiretap.so.0.0.1 /usr/new/lib/libwiretap.so.0.0.1 (cd /usr/new/lib && rm -f libwiretap.so.0 && ln -s libwiretap.so.0.0.1 libwiretap.so.0) (cd /usr/new/lib && rm -f libwiretap.so && ln -s libwiretap.so.0.0.1 libwiretap.so) /usr/bin/install -c .libs/libwiretap.lai /usr/new/lib/libwiretap.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/wiretap' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/wiretap' Making install in doc make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/doc' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/doc' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/doc' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/doc' Making install in epan make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan' Making install in crypt make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan/crypt' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan/crypt' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan/crypt' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan/crypt' Making install in ftypes make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan/ftypes' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan/ftypes' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan/ftypes' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan/ftypes' Making install in dfilter make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan/dfilter' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan/dfilter' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan/dfilter' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan/dfilter' Making install in dissectors make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan/dissectors' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan/dissectors' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan/dissectors' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan/dissectors' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/epan' /bin/sh ../mkinstalldirs /usr/new/lib /bin/sh ../libtool --mode=install /usr/bin/install -c libwireshark.la /usr/new/lib/libwireshark.la /usr/bin/install -c .libs/libwireshark.so.0.0.1 /usr/new/lib/libwireshark.so.0.0.1 (cd /usr/new/lib && rm -f libwireshark.so.0 && ln -s libwireshark.so.0.0.1 libwireshark.so.0) (cd /usr/new/lib && rm -f libwireshark.so && ln -s libwireshark.so.0.0.1 libwireshark.so) /usr/bin/install -c .libs/libwireshark.lai /usr/new/lib/libwireshark.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/epan' Making install in plugins make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins' Making install in agentx make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/agentx' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/agentx' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 mkdir -p -- /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c agentx.la /usr/new/lib/wireshark/plugins/0.99.7/agentx.la libtool: install: warning: relinking `agentx.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/agentx; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o agentx.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-agentx.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-agentx.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,agentx.so -o .libs/agentx.so /usr/bin/install -c .libs/agentx.soT /usr/new/lib/wireshark/plugins/0.99.7/agentx.so /usr/bin/install -c .libs/agentx.lai /usr/new/lib/wireshark/plugins/0.99.7/agentx.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/agentx' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/agentx' Making install in artnet make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/artnet' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/artnet' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c artnet.la /usr/new/lib/wireshark/plugins/0.99.7/artnet.la libtool: install: warning: relinking `artnet.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/artnet; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o artnet.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-artnet.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-artnet.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,artnet.so -o .libs/artnet.so /usr/bin/install -c .libs/artnet.soT /usr/new/lib/wireshark/plugins/0.99.7/artnet.so /usr/bin/install -c .libs/artnet.lai /usr/new/lib/wireshark/plugins/0.99.7/artnet.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/artnet' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/artnet' Making install in asn1 make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/asn1' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/asn1' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c asn1.la /usr/new/lib/wireshark/plugins/0.99.7/asn1.la libtool: install: warning: relinking `asn1.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/asn1; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o asn1.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-asn1.lo asn1.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-asn1.lo asn1.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,asn1.so -o .libs/asn1.so /usr/bin/install -c .libs/asn1.soT /usr/new/lib/wireshark/plugins/0.99.7/asn1.so /usr/bin/install -c .libs/asn1.lai /usr/new/lib/wireshark/plugins/0.99.7/asn1.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/asn1' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/asn1' Making install in ca make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ca' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ca' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c ca.la /usr/new/lib/wireshark/plugins/0.99.7/ca.la libtool: install: warning: relinking `ca.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/ca; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o ca.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-ca.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-ca.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,ca.so -o .libs/ca.so /usr/bin/install -c .libs/ca.soT /usr/new/lib/wireshark/plugins/0.99.7/ca.so /usr/bin/install -c .libs/ca.lai /usr/new/lib/wireshark/plugins/0.99.7/ca.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ca' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ca' Making install in ciscosm make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ciscosm' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ciscosm' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c ciscosm.la /usr/new/lib/wireshark/plugins/0.99.7/ciscosm.la libtool: install: warning: relinking `ciscosm.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/ciscosm; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o ciscosm.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-sm.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-sm.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,ciscosm.so -o .libs/ciscosm.so /usr/bin/install -c .libs/ciscosm.soT /usr/new/lib/wireshark/plugins/0.99.7/ciscosm.so /usr/bin/install -c .libs/ciscosm.lai /usr/new/lib/wireshark/plugins/0.99.7/ciscosm.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ciscosm' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ciscosm' Making install in docsis make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/docsis' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/docsis' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c docsis.la /usr/new/lib/wireshark/plugins/0.99.7/docsis.la libtool: install: warning: relinking `docsis.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/docsis; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o docsis.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-bpkmattr.lo packet-bpkmreq.lo packet-bpkmrsp.lo packet-intrngreq.lo packet-dccack.lo packet-dccreq.lo packet-dccrsp.lo packet-dcd.lo packet-docsis.lo packet-dsaack.lo packet-dsareq.lo packet-dsarsp.lo packet-dscack.lo packet-dscreq.lo packet-dscrsp.lo packet-dsdreq.lo packet-dsdrsp.lo packet-macmgmt.lo packet-map.lo packet-regack.lo packet-regreq.lo packet-regrsp.lo packet-rngreq.lo packet-rngrsp.lo packet-tlv.lo packet-type29ucd.lo packet-uccreq.lo packet-uccrsp.lo packet-ucd.lo packet-vendor.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-bpkmattr.lo packet-bpkmreq.lo packet-bpkmrsp.lo packet-intrngreq.lo packet-dccack.lo packet-dccreq.lo packet-dccrsp.lo packet-dcd.lo packet-docsis.lo packet-dsaack.lo packet-dsareq.lo packet-dsarsp.lo packet-dscack.lo packet-dscreq.lo packet-dscrsp.lo packet-dsdreq.lo packet-dsdrsp.lo packet-macmgmt.lo packet-map.lo packet-regack.lo packet-regreq.lo packet-regrsp.lo packet-rngreq.lo packet-rngrsp.lo packet-tlv.lo packet-type29ucd.lo packet-uccreq.lo packet-uccrsp.lo packet-ucd.lo packet-vendor.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,docsis.so -o .libs/docsis.so /usr/bin/install -c .libs/docsis.soT /usr/new/lib/wireshark/plugins/0.99.7/docsis.so /usr/bin/install -c .libs/docsis.lai /usr/new/lib/wireshark/plugins/0.99.7/docsis.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/docsis' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/docsis' Making install in enttec make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/enttec' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/enttec' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c enttec.la /usr/new/lib/wireshark/plugins/0.99.7/enttec.la libtool: install: warning: relinking `enttec.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/enttec; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o enttec.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-enttec.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-enttec.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,enttec.so -o .libs/enttec.so /usr/bin/install -c .libs/enttec.soT /usr/new/lib/wireshark/plugins/0.99.7/enttec.so /usr/bin/install -c .libs/enttec.lai /usr/new/lib/wireshark/plugins/0.99.7/enttec.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/enttec' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/enttec' Making install in ethercat make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ethercat' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ethercat' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c ethercat.la /usr/new/lib/wireshark/plugins/0.99.7/ethercat.la libtool: install: warning: relinking `ethercat.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/ethercat; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o ethercat.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-ethercat-frame.lo packet-ioraw.lo packet-nv.lo packet-ams.lo packet-ecatmb.lo packet-ethercat-datagram.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-ethercat-frame.lo packet-ioraw.lo packet-nv.lo packet-ams.lo packet-ecatmb.lo packet-ethercat-datagram.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,ethercat.so -o .libs/ethercat.so /usr/bin/install -c .libs/ethercat.soT /usr/new/lib/wireshark/plugins/0.99.7/ethercat.so /usr/bin/install -c .libs/ethercat.lai /usr/new/lib/wireshark/plugins/0.99.7/ethercat.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ethercat' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/ethercat' Making install in giop make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/giop' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/giop' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c cosnaming.la /usr/new/lib/wireshark/plugins/0.99.7/cosnaming.la libtool: install: warning: relinking `cosnaming.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/giop; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o cosnaming.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version packet-cosnaming.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared packet-cosnaming.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,cosnaming.so -o .libs/cosnaming.so /usr/bin/install -c .libs/cosnaming.soT /usr/new/lib/wireshark/plugins/0.99.7/cosnaming.so /usr/bin/install -c .libs/cosnaming.lai /usr/new/lib/wireshark/plugins/0.99.7/cosnaming.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- /bin/sh ../../libtool --mode=install /usr/bin/install -c coseventcomm.la /usr/new/lib/wireshark/plugins/0.99.7/coseventcomm.la libtool: install: warning: relinking `coseventcomm.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/giop; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o coseventcomm.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version packet-coseventcomm.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared packet-coseventcomm.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,coseventcomm.so -o .libs/coseventcomm.so /usr/bin/install -c .libs/coseventcomm.soT /usr/new/lib/wireshark/plugins/0.99.7/coseventcomm.so /usr/bin/install -c .libs/coseventcomm.lai /usr/new/lib/wireshark/plugins/0.99.7/coseventcomm.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- /bin/sh ../../libtool --mode=install /usr/bin/install -c tango.la /usr/new/lib/wireshark/plugins/0.99.7/tango.la libtool: install: warning: relinking `tango.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/giop; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o tango.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version packet-tango.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared packet-tango.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,tango.so -o .libs/tango.so /usr/bin/install -c .libs/tango.soT /usr/new/lib/wireshark/plugins/0.99.7/tango.so /usr/bin/install -c .libs/tango.lai /usr/new/lib/wireshark/plugins/0.99.7/tango.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- /bin/sh ../../libtool --mode=install /usr/bin/install -c parlay.la /usr/new/lib/wireshark/plugins/0.99.7/parlay.la libtool: install: warning: relinking `parlay.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/giop; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o parlay.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version packet-parlay.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared packet-parlay.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,parlay.so -o .libs/parlay.so /usr/bin/install -c .libs/parlay.soT /usr/new/lib/wireshark/plugins/0.99.7/parlay.so /usr/bin/install -c .libs/parlay.lai /usr/new/lib/wireshark/plugins/0.99.7/parlay.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/giop' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/giop' Making install in gryphon make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/gryphon' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/gryphon' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c gryphon.la /usr/new/lib/wireshark/plugins/0.99.7/gryphon.la libtool: install: warning: relinking `gryphon.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/gryphon; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o gryphon.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-gryphon.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-gryphon.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,gryphon.so -o .libs/gryphon.so /usr/bin/install -c .libs/gryphon.soT /usr/new/lib/wireshark/plugins/0.99.7/gryphon.so /usr/bin/install -c .libs/gryphon.lai /usr/new/lib/wireshark/plugins/0.99.7/gryphon.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/gryphon' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/gryphon' Making install in irda make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/irda' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/irda' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c irda.la /usr/new/lib/wireshark/plugins/0.99.7/irda.la libtool: install: warning: relinking `irda.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/irda; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o irda.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-ircomm.lo packet-irda.lo packet-sir.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-ircomm.lo packet-irda.lo packet-sir.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,irda.so -o .libs/irda.so /usr/bin/install -c .libs/irda.soT /usr/new/lib/wireshark/plugins/0.99.7/irda.so /usr/bin/install -c .libs/irda.lai /usr/new/lib/wireshark/plugins/0.99.7/irda.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/irda' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/irda' Making install in lwres make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/lwres' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/lwres' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c lwres.la /usr/new/lib/wireshark/plugins/0.99.7/lwres.la libtool: install: warning: relinking `lwres.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/lwres; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o lwres.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-lwres.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-lwres.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,lwres.so -o .libs/lwres.so /usr/bin/install -c .libs/lwres.soT /usr/new/lib/wireshark/plugins/0.99.7/lwres.so /usr/bin/install -c .libs/lwres.lai /usr/new/lib/wireshark/plugins/0.99.7/lwres.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/lwres' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/lwres' Making install in m2m make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/m2m' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/m2m' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c m2m.la /usr/new/lib/wireshark/plugins/0.99.7/m2m.la libtool: install: warning: relinking `m2m.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/m2m; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o m2m.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-m2m.lo wimax_tlv.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-m2m.lo wimax_tlv.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,m2m.so -o .libs/m2m.so /usr/bin/install -c .libs/m2m.soT /usr/new/lib/wireshark/plugins/0.99.7/m2m.so /usr/bin/install -c .libs/m2m.lai /usr/new/lib/wireshark/plugins/0.99.7/m2m.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/m2m' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/m2m' Making install in mate make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/mate' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/mate' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c mate.la /usr/new/lib/wireshark/plugins/0.99.7/mate.la libtool: install: warning: relinking `mate.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/mate; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o mate.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-mate.lo mate_setup.lo mate_runtime.lo mate_util.lo mate_grammar.lo mate_parser.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-mate.lo mate_setup.lo mate_runtime.lo mate_util.lo mate_grammar.lo mate_parser.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,mate.so -o .libs/mate.so /usr/bin/install -c .libs/mate.soT /usr/new/lib/wireshark/plugins/0.99.7/mate.so /usr/bin/install -c .libs/mate.lai /usr/new/lib/wireshark/plugins/0.99.7/mate.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/mate' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/mate' Making install in opcua make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/opcua' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/opcua' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c opcua.la /usr/new/lib/wireshark/plugins/0.99.7/opcua.la libtool: install: warning: relinking `opcua.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/opcua; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o opcua.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo opcua.lo opcua_transport_layer.lo opcua_security_layer.lo opcua_application_layer.lo opcua_serviceparser.lo opcua_complextypeparser.lo opcua_enumparser.lo opcua_simpletypes.lo opcua_servicetable.lo opcua_hfindeces.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo opcua.lo opcua_transport_layer.lo opcua_security_layer.lo opcua_application_layer.lo opcua_serviceparser.lo opcua_complextypeparser.lo opcua_enumparser.lo opcua_simpletypes.lo opcua_servicetable.lo opcua_hfindeces.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,opcua.so -o .libs/opcua.so /usr/bin/install -c .libs/opcua.soT /usr/new/lib/wireshark/plugins/0.99.7/opcua.so /usr/bin/install -c .libs/opcua.lai /usr/new/lib/wireshark/plugins/0.99.7/opcua.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/opcua' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/opcua' Making install in opsi make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/opsi' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/opsi' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c opsi.la /usr/new/lib/wireshark/plugins/0.99.7/opsi.la libtool: install: warning: relinking `opsi.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/opsi; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o opsi.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-opsi.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-opsi.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,opsi.so -o .libs/opsi.so /usr/bin/install -c .libs/opsi.soT /usr/new/lib/wireshark/plugins/0.99.7/opsi.so /usr/bin/install -c .libs/opsi.lai /usr/new/lib/wireshark/plugins/0.99.7/opsi.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/opsi' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/opsi' Making install in pcli make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/pcli' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/pcli' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c pcli.la /usr/new/lib/wireshark/plugins/0.99.7/pcli.la libtool: install: warning: relinking `pcli.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/pcli; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o pcli.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-pcli.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-pcli.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,pcli.so -o .libs/pcli.so /usr/bin/install -c .libs/pcli.soT /usr/new/lib/wireshark/plugins/0.99.7/pcli.so /usr/bin/install -c .libs/pcli.lai /usr/new/lib/wireshark/plugins/0.99.7/pcli.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/pcli' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/pcli' Making install in profinet make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/profinet' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/profinet' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c profinet.la /usr/new/lib/wireshark/plugins/0.99.7/profinet.la libtool: install: warning: relinking `profinet.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/profinet; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o profinet.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-dcerpc-pn-io.lo packet-dcom-cba.lo packet-dcom-cba-acco.lo packet-pn-dcp.lo packet-pn-mrp.lo packet-pn-mrrt.lo packet-pn-ptcp.lo packet-pn-rt.lo packet-pn.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-dcerpc-pn-io.lo packet-dcom-cba.lo packet-dcom-cba-acco.lo packet-pn-dcp.lo packet-pn-mrp.lo packet-pn-mrrt.lo packet-pn-ptcp.lo packet-pn-rt.lo packet-pn.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,profinet.so -o .libs/profinet.so /usr/bin/install -c .libs/profinet.soT /usr/new/lib/wireshark/plugins/0.99.7/profinet.so /usr/bin/install -c .libs/profinet.lai /usr/new/lib/wireshark/plugins/0.99.7/profinet.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/profinet' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/profinet' Making install in rlm make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rlm' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rlm' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c rlm.la /usr/new/lib/wireshark/plugins/0.99.7/rlm.la libtool: install: warning: relinking `rlm.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/rlm; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o rlm.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-rlm.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-rlm.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,rlm.so -o .libs/rlm.so /usr/bin/install -c .libs/rlm.soT /usr/new/lib/wireshark/plugins/0.99.7/rlm.so /usr/bin/install -c .libs/rlm.lai /usr/new/lib/wireshark/plugins/0.99.7/rlm.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rlm' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rlm' Making install in rtnet make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rtnet' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rtnet' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c rtnet.la /usr/new/lib/wireshark/plugins/0.99.7/rtnet.la libtool: install: warning: relinking `rtnet.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/rtnet; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o rtnet.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-rtnet.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-rtnet.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,rtnet.so -o .libs/rtnet.so /usr/bin/install -c .libs/rtnet.soT /usr/new/lib/wireshark/plugins/0.99.7/rtnet.so /usr/bin/install -c .libs/rtnet.lai /usr/new/lib/wireshark/plugins/0.99.7/rtnet.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rtnet' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rtnet' Making install in rudp make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rudp' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rudp' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c rudp.la /usr/new/lib/wireshark/plugins/0.99.7/rudp.la libtool: install: warning: relinking `rudp.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/rudp; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o rudp.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-rudp.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-rudp.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,rudp.so -o .libs/rudp.so /usr/bin/install -c .libs/rudp.soT /usr/new/lib/wireshark/plugins/0.99.7/rudp.so /usr/bin/install -c .libs/rudp.lai /usr/new/lib/wireshark/plugins/0.99.7/rudp.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rudp' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/rudp' Making install in sbus make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/sbus' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/sbus' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c sbus.la /usr/new/lib/wireshark/plugins/0.99.7/sbus.la libtool: install: warning: relinking `sbus.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/sbus; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o sbus.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-sbus.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-sbus.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,sbus.so -o .libs/sbus.so /usr/bin/install -c .libs/sbus.soT /usr/new/lib/wireshark/plugins/0.99.7/sbus.so /usr/bin/install -c .libs/sbus.lai /usr/new/lib/wireshark/plugins/0.99.7/sbus.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/sbus' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/sbus' Making install in stats_tree make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/stats_tree' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/stats_tree' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c stats_tree.la /usr/new/lib/wireshark/plugins/0.99.7/stats_tree.la libtool: install: warning: relinking `stats_tree.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/stats_tree; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o stats_tree.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version stats_tree_plugin.lo pinfo_stats_tree.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared stats_tree_plugin.lo pinfo_stats_tree.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,stats_tree.so -o .libs/stats_tree.so /usr/bin/install -c .libs/stats_tree.soT /usr/new/lib/wireshark/plugins/0.99.7/stats_tree.so /usr/bin/install -c .libs/stats_tree.lai /usr/new/lib/wireshark/plugins/0.99.7/stats_tree.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/stats_tree' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/stats_tree' Making install in unistim make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/unistim' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/unistim' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c unistim.la /usr/new/lib/wireshark/plugins/0.99.7/unistim.la libtool: install: warning: relinking `unistim.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/unistim; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o unistim.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-unistim.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-unistim.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,unistim.so -o .libs/unistim.so /usr/bin/install -c .libs/unistim.soT /usr/new/lib/wireshark/plugins/0.99.7/unistim.so /usr/bin/install -c .libs/unistim.lai /usr/new/lib/wireshark/plugins/0.99.7/unistim.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/unistim' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/unistim' Making install in v5ua make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/v5ua' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/v5ua' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c v5ua.la /usr/new/lib/wireshark/plugins/0.99.7/v5ua.la libtool: install: warning: relinking `v5ua.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/v5ua; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o v5ua.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-v5ua.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-v5ua.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,v5ua.so -o .libs/v5ua.so /usr/bin/install -c .libs/v5ua.soT /usr/new/lib/wireshark/plugins/0.99.7/v5ua.so /usr/bin/install -c .libs/v5ua.lai /usr/new/lib/wireshark/plugins/0.99.7/v5ua.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/v5ua' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/v5ua' Making install in wimax make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/wimax' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/wimax' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c wimax.la /usr/new/lib/wireshark/plugins/0.99.7/wimax.la libtool: install: warning: relinking `wimax.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/wimax; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o wimax.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-wmx.lo wimax_ffb_decoder.lo wimax_fch_decoder.lo wimax_pdu_decoder.lo wimax_cdma_code_decoder.lo wimax_hack_decoder.lo wimax_phy_attributes_decoder.lo mac_hd_generic_decoder.lo mac_hd_type1_decoder.lo mac_hd_type2_decoder.lo mac_mgmt_msg_decoder.lo msg_dcd.lo msg_ucd.lo msg_dlmap.lo msg_ulmap.lo msg_rng_req.lo msg_rng_rsp.lo msg_reg_req.lo msg_reg_rsp.lo msg_dreg.lo msg_dsa.lo msg_dsc.lo msg_dsd.lo msg_arq.lo msg_sbc.lo msg_pkm.lo msg_aas_fbck.lo msg_fpc.lo msg_pmc.lo msg_prc_lt_ctrl.lo msg_aas_beam.lo msg_res_cmd.lo msg_rep.lo msg_clk_cmp.lo msg_dsx_rvd.lo wimax_harq_map_decoder.lo wimax_compact_dlmap_ie_decoder.lo wimax_compact_ulmap_ie_decoder.lo wimax_utils.lo crc.lo crc_data.lo wimax_tlv.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-wmx.lo wimax_ffb_decoder.lo wimax_fch_decoder.lo wimax_pdu_decoder.lo wimax_cdma_code_decoder.lo wimax_hack_decoder.lo wimax_phy_attributes_decoder.lo mac_hd_generic_decoder.lo mac_hd_type1_decoder.lo mac_hd_type2_decoder.lo mac_mgmt_msg_decoder.lo msg_dcd.lo msg_ucd.lo msg_dlmap.lo msg_ulmap.lo msg_rng_req.lo msg_rng_rsp.lo msg_reg_req.lo msg_reg_rsp.lo msg_dreg.lo msg_dsa.lo msg_dsc.lo msg_dsd.lo msg_arq.lo msg_sbc.lo msg_pkm.lo msg_aas_fbck.lo msg_fpc.lo msg_pmc.lo msg_prc_lt_ctrl.lo msg_aas_beam.lo msg_res_cmd.lo msg_rep.lo msg_clk_cmp.lo msg_dsx_rvd.lo wimax_harq_map_decoder.lo wimax_compact_dlmap_ie_decoder.lo wimax_compact_ulmap_ie_decoder.lo wimax_utils.lo crc.lo crc_data.lo wimax_tlv.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,wimax.so -o .libs/wimax.so /usr/bin/install -c .libs/wimax.soT /usr/new/lib/wireshark/plugins/0.99.7/wimax.so /usr/bin/install -c .libs/wimax.lai /usr/new/lib/wireshark/plugins/0.99.7/wimax.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/wimax' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/wimax' Making install in wimaxasncp make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/wimaxasncp' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/wimaxasncp' make[3]: Nothing to be done for `install-exec-am'. /bin/sh ../../mkinstalldirs /usr/new/lib/wireshark/plugins/0.99.7 /bin/sh ../../libtool --mode=install /usr/bin/install -c wimaxasncp.la /usr/new/lib/wireshark/plugins/0.99.7/wimaxasncp.la libtool: install: warning: relinking `wimaxasncp.la' (cd /var/tmp/wireshark/wireshark-0.99.7/plugins/wimaxasncp; /bin/sh ../../libtool --mode=relink gcc -DINET6 "-D_U_=__attribute__((unused))" -g -O2 -Wall -W -Wpointer-arith -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/new/include -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -o wimaxasncp.la -rpath /usr/new/lib/wireshark/plugins/0.99.7 -module -avoid-version plugin.lo packet-wimaxasncp.lo wimaxasncp_dict.lo -L../../epan -lwireshark -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 ) gcc -shared plugin.lo packet-wimaxasncp.lo wimaxasncp_dict.lo -Wl,--rpath -Wl,/usr/new/lib -L/usr/local/lib -L/var/tmp/wireshark/wireshark-0.99.7/epan -L/usr/new/lib -lwireshark -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -Wl,-soname -Wl,wimaxasncp.so -o .libs/wimaxasncp.so /usr/bin/install -c .libs/wimaxasncp.soT /usr/new/lib/wireshark/plugins/0.99.7/wimaxasncp.so /usr/bin/install -c .libs/wimaxasncp.lai /usr/new/lib/wireshark/plugins/0.99.7/wimaxasncp.la PATH="$PATH:/sbin" ldconfig -n /usr/new/lib/wireshark/plugins/0.99.7 ---------------------------------------------------------------------- Libraries have been installed in: /usr/new/lib/wireshark/plugins/0.99.7 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/wimaxasncp' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins/wimaxasncp' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/plugins' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/plugins' Making install in packaging make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging' Making install in rpm make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm' Making install in SPECS make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm/SPECS' make[4]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm/SPECS' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm/SPECS' make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm/SPECS' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm' make[4]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm' make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/rpm' Making install in svr4 make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/svr4' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/svr4' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/svr4' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/svr4' Making install in nsis make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/nsis' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/nsis' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/nsis' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging/nsis' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging' make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/packaging' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging' make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/packaging' Making install in help make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/help' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/help' make[2]: Nothing to be done for `install-exec-am'. /bin/sh ../mkinstalldirs /usr/new/share/wireshark/help mkdir -p -- /usr/new/share/wireshark/help /usr/bin/install -c -m 644 toc /usr/new/share/wireshark/help/toc /usr/bin/install -c -m 644 getting_started.txt /usr/new/share/wireshark/help/getting_started.txt /usr/bin/install -c -m 644 capturing.txt /usr/new/share/wireshark/help/capturing.txt /usr/bin/install -c -m 644 capture_filters.txt /usr/new/share/wireshark/help/capture_filters.txt /usr/bin/install -c -m 644 display_filters.txt /usr/new/share/wireshark/help/display_filters.txt /usr/bin/install -c -m 644 faq.txt /usr/new/share/wireshark/help/faq.txt /usr/bin/install -c -m 644 overview.txt /usr/new/share/wireshark/help/overview.txt make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/help' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/help' Making install in codecs make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/codecs' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/codecs' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/codecs' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/codecs' Making install in gtk make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/gtk' make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7/gtk' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/gtk' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7/gtk' make[1]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7' /usr/new/bin/perl ./make-version.pl . Version configuration file version.conf not found. Using defaults. This is not a SVN build. svnversion.h is up-to-date. make[2]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7' /usr/new/bin/perl ./make-version.pl . Version configuration file version.conf not found. Using defaults. This is not a SVN build. svnversion.h is up-to-date. /bin/sh ./mkinstalldirs /usr/new/bin /bin/sh ./libtool --mode=install /usr/bin/install -c wireshark /usr/new/bin/wireshark /usr/bin/install -c .libs/wireshark /usr/new/bin/wireshark /bin/sh ./libtool --mode=install /usr/bin/install -c tshark /usr/new/bin/tshark /usr/bin/install -c .libs/tshark /usr/new/bin/tshark /bin/sh ./libtool --mode=install /usr/bin/install -c text2pcap /usr/new/bin/text2pcap /usr/bin/install -c .libs/text2pcap /usr/new/bin/text2pcap /bin/sh ./libtool --mode=install /usr/bin/install -c mergecap /usr/new/bin/mergecap /usr/bin/install -c .libs/mergecap /usr/new/bin/mergecap /bin/sh ./libtool --mode=install /usr/bin/install -c capinfos /usr/new/bin/capinfos /usr/bin/install -c .libs/capinfos /usr/new/bin/capinfos /bin/sh ./libtool --mode=install /usr/bin/install -c editcap /usr/new/bin/editcap /usr/bin/install -c .libs/editcap /usr/new/bin/editcap /bin/sh ./libtool --mode=install /usr/bin/install -c randpkt /usr/new/bin/randpkt /usr/bin/install -c .libs/randpkt /usr/new/bin/randpkt /bin/sh ./libtool --mode=install /usr/bin/install -c dftest /usr/new/bin/dftest /usr/bin/install -c .libs/dftest /usr/new/bin/dftest /bin/sh ./libtool --mode=install /usr/bin/install -c dumpcap /usr/new/bin/dumpcap /usr/bin/install -c .libs/dumpcap /usr/new/bin/dumpcap /bin/sh ./mkinstalldirs /usr/new/bin /usr/bin/install -c idl2wrs /usr/new/bin/idl2wrs make install-exec-hook make[3]: Entering directory `/var/tmp/wireshark/wireshark-0.99.7' make[3]: Nothing to be done for `install-exec-hook'. make[3]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7' /bin/sh ./mkinstalldirs /usr/new/share/wireshark/diameter mkdir -p -- /usr/new/share/wireshark/diameter /usr/bin/install -c -m 644 diameter/chargecontrol.xml /usr/new/share/wireshark/diameter/chargecontrol.xml /usr/bin/install -c -m 644 diameter/dictionary.dtd /usr/new/share/wireshark/diameter/dictionary.dtd /usr/bin/install -c -m 644 diameter/dictionary.xml /usr/new/share/wireshark/diameter/dictionary.xml /usr/bin/install -c -m 644 diameter/Ericsson.xml /usr/new/share/wireshark/diameter/Ericsson.xml /usr/bin/install -c -m 644 diameter/etsie2e4.xml /usr/new/share/wireshark/diameter/etsie2e4.xml /usr/bin/install -c -m 644 diameter/gqpolicy.xml /usr/new/share/wireshark/diameter/gqpolicy.xml /usr/bin/install -c -m 644 diameter/imscxdx.xml /usr/new/share/wireshark/diameter/imscxdx.xml /usr/bin/install -c -m 644 diameter/mobileipv4.xml /usr/new/share/wireshark/diameter/mobileipv4.xml /usr/bin/install -c -m 644 diameter/nasreq.xml /usr/new/share/wireshark/diameter/nasreq.xml /usr/bin/install -c -m 644 diameter/sip.xml /usr/new/share/wireshark/diameter/sip.xml /usr/bin/install -c -m 644 diameter/sunping.xml /usr/new/share/wireshark/diameter/sunping.xml /usr/bin/install -c -m 644 diameter/TGPPSh.xml /usr/new/share/wireshark/diameter/TGPPSh.xml /bin/sh ./mkinstalldirs /usr/new/share/wireshark/dtds mkdir -p -- /usr/new/share/wireshark/dtds /usr/bin/install -c -m 644 dtds/dc.dtd /usr/new/share/wireshark/dtds/dc.dtd /usr/bin/install -c -m 644 dtds/itunes.dtd /usr/new/share/wireshark/dtds/itunes.dtd /usr/bin/install -c -m 644 dtds/mscml.dtd /usr/new/share/wireshark/dtds/mscml.dtd /usr/bin/install -c -m 644 dtds/pocsettings.dtd /usr/new/share/wireshark/dtds/pocsettings.dtd /usr/bin/install -c -m 644 dtds/presence.dtd /usr/new/share/wireshark/dtds/presence.dtd /usr/bin/install -c -m 644 dtds/reginfo.dtd /usr/new/share/wireshark/dtds/reginfo.dtd /usr/bin/install -c -m 644 dtds/rlmi.dtd /usr/new/share/wireshark/dtds/rlmi.dtd /usr/bin/install -c -m 644 dtds/rss.dtd /usr/new/share/wireshark/dtds/rss.dtd /usr/bin/install -c -m 644 dtds/smil.dtd /usr/new/share/wireshark/dtds/smil.dtd /usr/bin/install -c -m 644 dtds/xcap-caps.dtd /usr/new/share/wireshark/dtds/xcap-caps.dtd /usr/bin/install -c -m 644 dtds/xcap-error.dtd /usr/new/share/wireshark/dtds/xcap-error.dtd /usr/bin/install -c -m 644 dtds/watcherinfo.dtd /usr/new/share/wireshark/dtds/watcherinfo.dtd /bin/sh ./mkinstalldirs /usr/new/man/man1 /usr/bin/install -c -m 644 ./wireshark.1 /usr/new/man/man1/wireshark.1 /usr/bin/install -c -m 644 ./tshark.1 /usr/new/man/man1/tshark.1 /usr/bin/install -c -m 644 ./text2pcap.1 /usr/new/man/man1/text2pcap.1 /usr/bin/install -c -m 644 ./mergecap.1 /usr/new/man/man1/mergecap.1 /usr/bin/install -c -m 644 ./capinfos.1 /usr/new/man/man1/capinfos.1 /usr/bin/install -c -m 644 ./editcap.1 /usr/new/man/man1/editcap.1 /usr/bin/install -c -m 644 ./dumpcap.1 /usr/new/man/man1/dumpcap.1 /usr/bin/install -c -m 644 ./idl2wrs.1 /usr/new/man/man1/idl2wrs.1 /bin/sh ./mkinstalldirs /usr/new/man/man4 /usr/bin/install -c -m 644 ./wireshark-filter.4 /usr/new/man/man4/wireshark-filter.4 /bin/sh ./mkinstalldirs /usr/new/share/wireshark /usr/bin/install -c -m 644 AUTHORS-SHORT /usr/new/share/wireshark/AUTHORS-SHORT /usr/bin/install -c -m 644 COPYING /usr/new/share/wireshark/COPYING /usr/bin/install -c -m 644 manuf /usr/new/share/wireshark/manuf /usr/bin/install -c -m 644 services /usr/new/share/wireshark/services /usr/bin/install -c -m 644 wireshark.html /usr/new/share/wireshark/wireshark.html /usr/bin/install -c -m 644 tshark.html /usr/new/share/wireshark/tshark.html /usr/bin/install -c -m 644 wireshark-filter.html /usr/new/share/wireshark/wireshark-filter.html /usr/bin/install -c -m 644 capinfos.html /usr/new/share/wireshark/capinfos.html /usr/bin/install -c -m 644 editcap.html /usr/new/share/wireshark/editcap.html /usr/bin/install -c -m 644 idl2wrs.html /usr/new/share/wireshark/idl2wrs.html /usr/bin/install -c -m 644 mergecap.html /usr/new/share/wireshark/mergecap.html /usr/bin/install -c -m 644 text2pcap.html /usr/new/share/wireshark/text2pcap.html /usr/bin/install -c -m 644 dumpcap.html /usr/new/share/wireshark/dumpcap.html /usr/bin/install -c -m 644 cfilters /usr/new/share/wireshark/cfilters /usr/bin/install -c -m 644 colorfilters /usr/new/share/wireshark/colorfilters /usr/bin/install -c -m 644 dfilters /usr/new/share/wireshark/dfilters /usr/bin/install -c -m 644 smi_modules /usr/new/share/wireshark/smi_modules /bin/sh ./mkinstalldirs /usr/new/share/wireshark/radius mkdir -p -- /usr/new/share/wireshark/radius /usr/bin/install -c -m 644 radius/dictionary /usr/new/share/wireshark/radius/dictionary /usr/bin/install -c -m 644 radius/dictionary.3com /usr/new/share/wireshark/radius/dictionary.3com /usr/bin/install -c -m 644 radius/dictionary.3gpp /usr/new/share/wireshark/radius/dictionary.3gpp /usr/bin/install -c -m 644 radius/dictionary.3gpp2 /usr/new/share/wireshark/radius/dictionary.3gpp2 /usr/bin/install -c -m 644 radius/dictionary.acc /usr/new/share/wireshark/radius/dictionary.acc /usr/bin/install -c -m 644 radius/dictionary.alcatel /usr/new/share/wireshark/radius/dictionary.alcatel /usr/bin/install -c -m 644 radius/dictionary.alteon /usr/new/share/wireshark/radius/dictionary.alteon /usr/bin/install -c -m 644 radius/dictionary.altiga /usr/new/share/wireshark/radius/dictionary.altiga /usr/bin/install -c -m 644 radius/dictionary.aptis /usr/new/share/wireshark/radius/dictionary.aptis /usr/bin/install -c -m 644 radius/dictionary.ascend /usr/new/share/wireshark/radius/dictionary.ascend /usr/bin/install -c -m 644 radius/dictionary.bay /usr/new/share/wireshark/radius/dictionary.bay /usr/bin/install -c -m 644 radius/dictionary.bintec /usr/new/share/wireshark/radius/dictionary.bintec /usr/bin/install -c -m 644 radius/dictionary.bristol /usr/new/share/wireshark/radius/dictionary.bristol /usr/bin/install -c -m 644 radius/dictionary.cablelabs /usr/new/share/wireshark/radius/dictionary.cablelabs /usr/bin/install -c -m 644 radius/dictionary.cabletron /usr/new/share/wireshark/radius/dictionary.cabletron /usr/bin/install -c -m 644 radius/dictionary.cisco /usr/new/share/wireshark/radius/dictionary.cisco /usr/bin/install -c -m 644 radius/dictionary.cisco.bbsm /usr/new/share/wireshark/radius/dictionary.cisco.bbsm /usr/bin/install -c -m 644 radius/dictionary.cisco.vpn3000 /usr/new/share/wireshark/radius/dictionary.cisco.vpn3000 /usr/bin/install -c -m 644 radius/dictionary.cisco.vpn5000 /usr/new/share/wireshark/radius/dictionary.cisco.vpn5000 /usr/bin/install -c -m 644 radius/dictionary.colubris /usr/new/share/wireshark/radius/dictionary.colubris /usr/bin/install -c -m 644 radius/dictionary.columbia_university /usr/new/share/wireshark/radius/dictionary.columbia_university /usr/bin/install -c -m 644 radius/dictionary.compat /usr/new/share/wireshark/radius/dictionary.compat /usr/bin/install -c -m 644 radius/dictionary.cosine /usr/new/share/wireshark/radius/dictionary.cosine /usr/bin/install -c -m 644 radius/dictionary.ericsson /usr/new/share/wireshark/radius/dictionary.ericsson /usr/bin/install -c -m 644 radius/dictionary.erx /usr/new/share/wireshark/radius/dictionary.erx /usr/bin/install -c -m 644 radius/dictionary.extreme /usr/new/share/wireshark/radius/dictionary.extreme /usr/bin/install -c -m 644 radius/dictionary.foundry /usr/new/share/wireshark/radius/dictionary.foundry /usr/bin/install -c -m 644 radius/dictionary.freeradius /usr/new/share/wireshark/radius/dictionary.freeradius /usr/bin/install -c -m 644 radius/dictionary.gandalf /usr/new/share/wireshark/radius/dictionary.gandalf /usr/bin/install -c -m 644 radius/dictionary.garderos /usr/new/share/wireshark/radius/dictionary.garderos /usr/bin/install -c -m 644 radius/dictionary.gemtek /usr/new/share/wireshark/radius/dictionary.gemtek /usr/bin/install -c -m 644 radius/dictionary.itk /usr/new/share/wireshark/radius/dictionary.itk /usr/bin/install -c -m 644 radius/dictionary.juniper /usr/new/share/wireshark/radius/dictionary.juniper /usr/bin/install -c -m 644 radius/dictionary.karlnet /usr/new/share/wireshark/radius/dictionary.karlnet /usr/bin/install -c -m 644 radius/dictionary.livingston /usr/new/share/wireshark/radius/dictionary.livingston /usr/bin/install -c -m 644 radius/dictionary.localweb /usr/new/share/wireshark/radius/dictionary.localweb /usr/bin/install -c -m 644 radius/dictionary.merit /usr/new/share/wireshark/radius/dictionary.merit /usr/bin/install -c -m 644 radius/dictionary.microsoft /usr/new/share/wireshark/radius/dictionary.microsoft /usr/bin/install -c -m 644 radius/dictionary.mikrotik /usr/new/share/wireshark/radius/dictionary.mikrotik /usr/bin/install -c -m 644 radius/dictionary.navini /usr/new/share/wireshark/radius/dictionary.navini /usr/bin/install -c -m 644 radius/dictionary.netscreen /usr/new/share/wireshark/radius/dictionary.netscreen /usr/bin/install -c -m 644 radius/dictionary.nokia /usr/new/share/wireshark/radius/dictionary.nokia /usr/bin/install -c -m 644 radius/dictionary.nomadix /usr/new/share/wireshark/radius/dictionary.nomadix /usr/bin/install -c -m 644 radius/dictionary.propel /usr/new/share/wireshark/radius/dictionary.propel /usr/bin/install -c -m 644 radius/dictionary.quintum /usr/new/share/wireshark/radius/dictionary.quintum /usr/bin/install -c -m 644 radius/dictionary.redback /usr/new/share/wireshark/radius/dictionary.redback /usr/bin/install -c -m 644 radius/dictionary.redcreek /usr/new/share/wireshark/radius/dictionary.redcreek /usr/bin/install -c -m 644 radius/dictionary.shasta /usr/new/share/wireshark/radius/dictionary.shasta /usr/bin/install -c -m 644 radius/dictionary.shiva /usr/new/share/wireshark/radius/dictionary.shiva /usr/bin/install -c -m 644 radius/dictionary.sonicwall /usr/new/share/wireshark/radius/dictionary.sonicwall /usr/bin/install -c -m 644 radius/dictionary.springtide /usr/new/share/wireshark/radius/dictionary.springtide /usr/bin/install -c -m 644 radius/dictionary.t_systems_nova /usr/new/share/wireshark/radius/dictionary.t_systems_nova /usr/bin/install -c -m 644 radius/dictionary.telebit /usr/new/share/wireshark/radius/dictionary.telebit /usr/bin/install -c -m 644 radius/dictionary.trapeze /usr/new/share/wireshark/radius/dictionary.trapeze /usr/bin/install -c -m 644 radius/dictionary.tunnel /usr/new/share/wireshark/radius/dictionary.tunnel /usr/bin/install -c -m 644 radius/dictionary.unisphere /usr/new/share/wireshark/radius/dictionary.unisphere /usr/bin/install -c -m 644 radius/dictionary.unix /usr/new/share/wireshark/radius/dictionary.unix /usr/bin/install -c -m 644 radius/dictionary.usr /usr/new/share/wireshark/radius/dictionary.usr /usr/bin/install -c -m 644 radius/dictionary.valemount /usr/new/share/wireshark/radius/dictionary.valemount /usr/bin/install -c -m 644 radius/dictionary.versanet /usr/new/share/wireshark/radius/dictionary.versanet /usr/bin/install -c -m 644 radius/dictionary.wispr /usr/new/share/wireshark/radius/dictionary.wispr /usr/bin/install -c -m 644 radius/dictionary.xedia /usr/new/share/wireshark/radius/dictionary.xedia /bin/sh ./mkinstalldirs /usr/new/share/wireshark/tpncp mkdir -p -- /usr/new/share/wireshark/tpncp /usr/bin/install -c -m 644 tpncp/tpncp.dat /usr/new/share/wireshark/tpncp/tpncp.dat /bin/sh ./mkinstalldirs /usr/new/share/wireshark/wimaxasncp mkdir -p -- /usr/new/share/wireshark/wimaxasncp /usr/bin/install -c -m 644 wimaxasncp/dictionary.xml /usr/new/share/wireshark/wimaxasncp/dictionary.xml /usr/bin/install -c -m 644 wimaxasncp/dictionary.dtd /usr/new/share/wireshark/wimaxasncp/dictionary.dtd make[2]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7' make[1]: Leaving directory `/var/tmp/wireshark/wireshark-0.99.7'