| Description: | Returns integer data from a real-time clock. SYSTEM_CLOCK returns the number of seconds from 00:00 Coordinated Universal Time (CUT) on 1 JAN 1970. The number is returned with no bias. To get the elapsed time, you must call SYSTEM_CLOCK twice, and subtract the starting time value from the ending time value. | ||
| Class: | Subroutine | ||
| Arguments: | There are three optional arguments1: | ||
| COUNT (opt) | Must be scalar and of type default integer. It is set to a value based on the current value of the processor clock. The value is increased by one for each clock count until the value COUNT_MAX is reached, and is reset to zero at the next count. (COUNT lies in the range 0 to COUNT_MAX.) | ||
| COUNT_RATE (opt) | Must be scalar and
of type default integer. It is set to the number of processor clock
counts per second.
If default integer is INTEGER(2), COUNT_RATE is 1000. If default integer is INTEGER(4), COUNT_RATE is 10000. If default integer is INTEGER(8), COUNT_RATE is 1000000. | ||
| COUNT_MAX (opt) | Must be scalar and of type default integer. It is set to the maximum value that COUNT can have, HUGE(0). For more information on HUGE, see Section 9.3.56. | ||
| 1 All are INTENT(OUT) arguments. (See Section 5.10.) | |||
Examples
Consider the following:
integer(2) :: ic2, crate2, cmax2
integer(4) :: ic4, crate4, cmax4
call system_clock(count=ic2, count_rate=crate2, count_max=cmax2)
call system_clock(count=ic4, count_rate=crate4, count_max=cmax4)
print *, ic2, crate2, cmax2
print *, ic4, crate4, cmax4
end
This program was run on Thursday Dec 11, 1997 at 14:23:55 EST and produced the following output:
13880 1000 32767
1129498807 10000 2147483647