loop2tbl

!
! loop2tbl.tbl k.furukawa dec.5.1993.
!
! table for LOOP2 ports
!
! Modifications:
! converted from loop3tbl and loopctbl
!
!separator = ' '
!keyword = "NAME NODE BASE CH WTICK C0 C1 C2 C3 C4 C5 C6 C7"
!format = "%s %s %x %d %d %x %x %x %x %x %x %x %x"
!
! NOTES:
! separator/keyword/format, follows '!' immediately, are regarded as
! table parameters.
! NAME and NODE are reserved keywords for char* entry. NAME shoud be
! given in the table, while NODE is optional. Entrys after these two
! are read as integer(s) according to the format specified.
!
! ---------------------------------------------------------------------------
! BASE: not used(gpib), or base address(vme, but should be defined elsewhere)
! CH: 0:gpib-camac, 1:vme-1, 2:vme-2, 3:vme-3
! WTICK: msec to wait in main loop
! C0: first address to poll (group1)
! C1: last address to poll (group1)
! C2: first address to poll (group2)
! C3: last address to poll (group2)
! ---------------------------------------------------------------------------
!
! portname nodename baseaddr ch wait-tick
!
NAME	NODE	BASE	CH	WTICK	C0	C1	C2	C3	C4	C5	C6	C7
L2-0-1	kannaduki	0	0	100	1140	1141	1142	1142	0	0	0	0
!
L2-1-1	mutsuki	0	0	100	1140	1148	0	0	0	0	0	0
!
L2-2-1	kisaragi	0	0	100	1140	1148	0	0	0	0	0	0
!
L2-3-1	yayoi	0	0	100	1140	1148	0	0	0	0	0	0
!
L2-4-1	uduki	0	0	100	1140	1148	0	0	0	0	0	0
!
L2-5-1	satsuki	0	0	100	1140	1148	0	0	0	0	0	0
!
L2-P-1	fumiduki	0	0	100	1240	1248	0	0	0	0	0	0
L2-P-2	fumiduki	0	0	100	104a	104a	0	0	0	0	0	0
!
L2-J-1	jiro	0	0	100	1141	1141	0	0	0	0	0	0